| Product Name |
TP-Link Wi-Fi Outdoor CPE510 5GHz 300Mbps 13dBi CPE |
| Hardware Features |
|
| Processor |
Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc |
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Interface |
1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in) |
|
1 Grounding Terminal |
|
1 Reset Button |
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) |
|
Voltage range: 16-27VDC |
|
Power Consumption: 9.8 Watts Max |
| Dimensions (W x D x H) |
224 x 79 x 60 mm |
| Antenna Type |
Built-in 13dBi 2×2 Dual-polarized Directional Antenna |
|
Beam Width: 45° (H-Plane) / 30° (E-Plane) |
| Protection |
15KV ESD Protection |
|
6KV Lightning Protection |
| Enclosure |
Outdoor ASA stabilized plastic material |
|
IPX5 waterproof Certification |
| Wireless Features |
|
| Wireless Standards |
IEEE 802.11a/n (with Pharos MAXtream disabled) |
| Proprietary Protocol |
TDMA Mode (with Pharos MAXtream enabled) |
| Wireless Speeds |
Up to 300Mbps (40MHz,Dynamic) |
|
Up to 144.4Mbps (20MHz,Dynamic) |
|
Up to 72.2Mbps (10MHz,Dynamic) |
|
Up to 36.1Mbps (5MHz,Dynamic) |
| Frequency |
5.15~5.85GHz |
| Transmission Power |
23dBm/200mw (Adjustable power by 1dBm) |
| Software Features |
|
| Wireless Configurations |
Pharos MAXtream TDMA Technology |
|
802.11a/n Modes |
|
Selectable Channel Width: 5/10/20/40MHz |
|
Automatic Channel Selection |
|
Transmission Power Control |
|
Dynamic Frequency Selection (DFS) |
|
WDS Enable/Disable |
|
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
|
SSID Broadcast Enable/Disable |
|
Multi-SSID with VLAN Tagging (AP mode only) |
|
Distance/ACK Timeout Setting |
|
Wireless MAC Address Filter |
|
Wireless Advanced: |
|
> Beacon Interval/RTS Threshold/Fragmentation |
|
> Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Management |
Discovery and Remote Management via Pharos Control application |
|
HTTP/HTTPS Web-based management |
|
System Log |
|
SNMP Agent(v2c) |
|
Ping Watch Dog |
|
Dynamic DDNS |
|
SSH Server |
|
System Tools: |
|
> Wireless Signal Quality Indicators: |
|
Signal Strength/Noise/Transmit CCQ/CPU/Memory |
|
> Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP |
|
> Spectrum Analyzer |
|
> Speed Test |
|
> Ping |
|
> Traceroute |
|
System-level Optimizations: |
|
> Optimized IGMP Snooping/Proxy for multicast applications |
|
> Hardware watch dog |
| POE Adapter Features |
|
| Dimensions (W x D x H) |
85.8×43.9×29.7 mm |
| Interfaces |
1 AC Jack with Earth Ground |
|
1 10/100Mbps Shielded Ethernet Port (Power + Data) |
|
1 10/100Mbps Shielded Ethernet Port (Data) |
| Button |
Remote Reset Button |
| Power Status LEDs |
Green |
| Input |
100-240VAC, 50/60Hz |
| Output |
24VDC, 0.5A Max |
|
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
| Efficiency |
>80% |
| Certifications |
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| Others |
|
| Certification |
CE, FCC, RoHS, IPX5 |
| Package Contents |
Outdoor Wireless CPE |
|
24V 0.5A Passive PoE Adapter |
|
Pole Mounting Straps |
|
AC Power Cord |
|
Installation Guide |
| System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux |
|
Note: We recommend you to use one of the following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |
| Environment |
Operating Temperature: -40℃70℃ (-40℉158℉) |
|
Storage Temperature: -40℃70℃ (-40℉158℉) |
|
Operating Humidity: 10%~90% non-condensing |
|
Storage Humidity: 5%~95% non-condensing |
Vesa Mount Bracket
